Lx1-AS Coil-on-Plug probe for USB Autoscope IV
- 13.00 USD
Lx1-AS is an inductive type sensor designed for diagnosing COP ignition systems and picking up a triggering pulse from the first (or any other) cylinder. Lx1 can also be used for distributor and DIS systems (two or more ignition coils are diagnosed one by one). The sensor is directly mounted on an ignition coil and gives the ability to measure secondary voltage parameters, accessing ignition spark capability and identifying problems related to high-voltage wires, plugs, caps and coils.
The sensor’s case is rubberized, which makes a fragile sensor element damage-proof. A soft cable with a high density braided copper shield to minimize noise pickup so you can get high accuracy of the measured signal.
Sensor Operation Principle
The ignition coil of the internal-combustion engine operates on the principle of a step-up transformer and has two windings and a shared core. Therefore, when current strength in the primary winding changes, it triggers EMF, which results in current strength change in the secondary winding, and vice versa. If an extra inductance coil is placed in the ignition coil’s electromagnetic field, it’ll cause EMF in proportion to the changes in the coil’s magnetic field. This is how a secondary voltage waveform is obtained.
The detecting element of the Lx1-AS sensor is an inductance coil. In order to detect a secondary voltage signal, the sensor’s detecting head is to be fixed on the surface of the ignition coil, within its electromagnetic field. Generally, the upper part of the ignition coil is a flat area for the detecting head to be placed on. Double-sided foam tape will do for the fixing on the coil case. Before assembling, the surface of the coil and sensor is to be cleaned and dusted.
The secondary voltage signal’s shape depends on the sensor’s location in relation to the coil’s electromagnetic field. That’s why when placing a detecting head it’s advisable to keep in mind the following. The symmetry axis of the sensor’s detecting coil is to be placed along the axis of the ignition coil’s core. The distance between the coil and the head is to be as minimum as possible. If you can’t define the ignition coil’s type by eye, you can then change the sensor’s location in relation to the ignition coil until the oscilloscope catches a signal with the biggest amplitude. The precise Lx1-AS synchronizing sensor’s location isn’t that crucial, as its function is restricted to detecting breakdown impulse.